Rule <R59> and parts repair

[FRC2996]

Our team experienced a number of Jaguar failures. Analysis showed that in some cases it was due to bad solder joints on the screw terminals. These are easily soldered to repair them. There is some concern that rule <R59>, preventing tampering, modifying, or adjusting a number of components, would prohibit fixing our broken Jaguars.

Please confirm if under rule <R59> we are permitted to "repair" failed subsystems using competent individuals experienced in these procedures.

[GDC]

Yes, this would be a violation of Rule <R59>.

Faulty components should be reported to the manufacturer (in this case, www.luminarymicro.com/jaguar).