Code help

[Team 1990]

Hello from team 1990,
I have been trying for two days to get the default program to work on our test bot. I have been able to update the classmate both driverstation and labview. I have been able to format the crio both wirelessly and through crossover cable connection. Labview acts as if the program is deploying yet nothing happend on the bot all lights 2 jaguars and green on sidecar, remain flashing. The drivers tation program says no code in the status screen. I have tried running the program in labview instead of deploy both with the run on right click and the arrow. Nothing seems to be effective. Any suggestions would be very welcome.
thanks,
Jim
Team 1990

[Marshal Horn]

Hey, I was having that trouble too.
I found that when my LabVIEW project explorer is connected, then the Driver's Station (DS) says it can't connect the robot.
However, when I build and deploy a startup application, the DS says it can connect to the robot (after I mouse over), but it still says there is no code.

Perhaps there is a mismatch between the code and the DS. I've updated my development computer, but I haven't updated the DS.

[GWhizNonKid]

Would this question play better in the programming section?

[CNhorsepower]

We are having problemsw with that too... our computer says the program has deployed yet when we switch to Driver "mode" it says we do not have a robot code

[FRC2813]

Yep...right now I'm fighting that problem....good deploy..."no Code". I'll go to the program forum.

[Greg McKaskle]

If using the classmate as both DS and development tool, some teams are in the developer account, they start their code within the debugger, exit the developer account to log in as driver, and then face an error about having no code on the robot.

The reason this fails to work is that when logging out of the developer account, the programs running there are exited, and so the code on the robot running in the debugger is terminated as well.

To accomplish this on one computer, stay logged into the developer account and run the driver station from the Start menu.

Greg McKaskle

[Team 1990]

Thanks for all the help and suggestions. Glad to know i was not alone on this problem. I have gotten code to run by running code in developer mode with the driver station open. How do i send the code to the driver station so that i can use it in driver mode, if i am deploying from the classmate.
thanks for any help,
Jim
Team 1990