Results 1 to 2 of 2

Thread: Pnuematic Fittings

  1. #1
    Join Date
    Jan 2010
    Posts
    1

    Default Pnuematic Fittings

    We need clarification on additional fittings for connections. Can we use 1/4" hard piping to connect between compressor and solenoid/cylinder? Also, is it permissible to use multiple 1/8" tubing into a single input for the cylinder? (Basically a parallel circuit)

  2. #2
    Join Date
    Jan 2006
    Posts
    2,777

    Default Re: Pnuematic Fittings

    1 - Standard COTS hard pipe segments (e.g. pipe nipples) of an appropriate pressure rating are permitted by Rule <R72-F>, as they would be considered connecting fittings. Note however, that they cannot connect the compressor straight to the solenoid valve or cylinders - all the required intermediate components must still be included in the pneumatic circuit.

    2 - There are no rules that would prohibit that.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •