Results 1 to 3 of 3

Thread: dlink dap 1522

  1. #1
    Join Date
    Mar 2012
    La Crosse, Wisconsin

    Default dlink dap 1522

    We have completed our FIRST competition. Does the d link need to be reset so we can communicate with the robot wirelessly. The communication is fine when the d link is hard wired to the dirvers station?
    A FIRST Year Coach,

  2. #2
    Join Date
    Nov 2010
    Newfane, NY

    Default Re: dlink dap 1522

    You do need to switch it from bridge mode to AP (access point) mode using the switch on the back.

  3. #3
    Join Date
    Oct 2011

    Default Re: dlink dap 1522

    You have two options to get your robot radio back into a state where it can communicate with your Classmate wirelessly.

    The option I would recommend is to reset the radio to factory defaults and set it up again as described in the Getting Started with the 2012 Control System document.

    The other option is to log into the bridge at it's current address 10.xx.yy.01 and disable the security, then move the switch to AP mode.
    FRC Robotics Engineer

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. DAP 1522 power
    By qpang in forum Robot
    Replies: 5
    Last Post: 02-23-2012, 10:07 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts