Results 1 to 2 of 2

Thread: Finish Line tape material

  1. #1
    FRC340 Guest

    Post Finish Line tape material

    From Section: 6.2.1: Boundaries and Markings
    A red or blue “FINISH LINE” is marked on each side on the carpet under the OVERPASS. The FINISH LINE is indicated by a six-inch wide tripe of black-and-white checkered tape, followed by a two-inch wide stripe of colored gaffers tape. The pipes of the OVERPASS structure coplanar with the vertical projection of the gaffers tape are colored to provide further indication of the plane of the FINISH LINE. For the red FINISH LINE, the gaffers tape and pipes are red, and for the blue FINISH LINE the gaffers tape and pipes are blue.
    Arena Layout and Markings Has this text for the lines as 3" TAPE BLK/WHT W/3" STRIPE EVERY 3", TWO STRIPS
    Is there a source for this finish line tape? All that I can find is a 2 inch tape, or a 3 inch tape, with 3 rows.

  2. #2
    Join Date
    Jan 2006
    Posts
    2,777

    Default Re: Finish Line tape material

    The checkered tape was custom printed and is not available by roll, or even by case. For large volume orders (80 rolls minimum), you can contact the original vendor, Wholesale Tape, at 1-800-642-8273. The tape is white 3-inch gaffers tape, printed with a 3-inch square black checkerboard pattern.

    If "close enough" is "good enough" for your purposes, 1" vinyl checkered tape is readily available from such sites as http://www.findtape.com (click on "Racer's Tape").
    Last edited by GDC; 02-04-2008 at 03:29 PM. Reason: corrected checkerboard pattern dimensions

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •