Page 5 of 9 FirstFirst 123456789 LastLast
Results 41 to 50 of 88

Thread: Section 4 FVC Q&A

  1. #41
    Join Date
    Jun 2006
    Posts
    213

    Default Re: Section 4 FVC Q&A

    Quote Originally Posted by Swiftstrike
    Q: How secure is the high goal to the arena and would it be damaged if a robot were to ram into it to cause a mechanism to activate on impact?
    A: Page 38 of the Field Specifications & Documents describes how the high goals are attached to the playing field. It is impossible to answer the second part of this question without knowing the nature of the robot in question. This determination is left up to the team.

  2. #42
    Join Date
    Jun 2006
    Posts
    213

    Default Re: Section 4 FVC Q&A

    Quote Originally Posted by psouth
    Q: Is it legal to use galvanized steel plates or aluminum sheets that are not manufactured by Vex on our robots?
    A: No, this would be a violation of <R5>.

  3. #43
    Join Date
    Oct 2005
    Posts
    251

    Default Re: Section 4 FVC Q&A

    Quote Originally Posted by PaulLathrop06
    Q: Can we cut the tread?
    A: Yes, provided no other FVC rules are violated.

  4. #44
    Join Date
    Oct 2005
    Posts
    251

    Default Re: Section 4 FVC Q&A

    Quote Originally Posted by PaulLathrop06
    Q: Can we cut the tread to make better chain?
    A: Yes, provided no other FVC rules are violated.

  5. #45
    Join Date
    Oct 2005
    Posts
    251

    Default Re: Section 4 FVC Q&A

    Quote Originally Posted by Orio
    The manual states the following:
    The following additional components may also be used:
    · Ten (10) elastic bands, #32 size only
    · 40” of 1/8” Nylon Rope
    · 6” of 3/4” Wide Velcro
    · 12” x 15” of Non-Slip Pad

    Q: Would it be legal to start from the above components and modify their characteristics? For example, unraveling the nylon rope into its separate strands and reforming to get a longer but thinner rope. Or cutting the rubber bands to obtain smaller sections.
    A: There is no rule specifically prohibiting these modifications as stated and thus they are legal. Please be sure not to violate other FVC rules in the process.

  6. #46
    Join Date
    Jun 2006
    Posts
    213

    Default Re: Section 4 FVC Q&A

    Quote Originally Posted by Steve Warren
    Q: I know that we can only use official VEX battery packs however are we allowed to use non VEX quick chargers to charge the batteries?
    A: In the interests of fairness among all teams, and safety, chargers are restricted to those included in the Vex Power Pack.

  7. #47
    Join Date
    Jun 2006
    Posts
    213

    Default Re: Section 4 FVC Q&A

    Quote Originally Posted by JPrickaerts
    Q. Can we use a rapid charger to recharge the 7.2v battery between matches or must we use the Vex recharger?
    A: Please see: http://forums.usfirst.org/showpost.p...4&postcount=46

  8. #48
    Join Date
    Jun 2006
    Posts
    213

    Default Re: Section 4 FVC Q&A

    Quote Originally Posted by DarrellGray
    Q: It is really necessary to have 3" digits with 3/4" stroke?
    A: Yes, it is necessary.

  9. #49
    Join Date
    Jun 2006
    Posts
    213

    Default Re: Section 4 FVC Q&A

    Quote Originally Posted by Swiftstrike
    Q: We have another question about programing. Do we have to set the autonomous mode in any way ourselves or is it all ready set-up by FVC people?
    A: For all details needed to run an autonomous mode in this year's game, please see:

    http://www.vexrobotics.com/programming/index.shtml

    Here you will find the templates needed to create your own autonomous mode.

  10. #50
    Join Date
    Jun 2006
    Posts
    213

    Default Re: Section 4 FVC Q&A

    Quote Originally Posted by Swiftstrike
    My question is in regard to securing bolts or screws using Loctite. Is this allowed?
    A: Please see <R9b>.

Page 5 of 9 FirstFirst 123456789 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •