LabVIEW and Driver station interaction

[jimc2550]

1. It seems one way to use LabVIEW programs developed on computers other than the Classmate netbook is to transfer via USB stick and copy into LabVIEW Data folder. I assume this needs to be the whole project file.
Is there another way to run project files from another computer?

2. The literature seems to emphasize a different IP address for the Classmate used as a DS and anyother computer to prevent contention. Under what conditions would both computers be in a network with the cRIO at the same time?

[Marshal Horn]

Well, if you connect another computer to the same network (wirelessly or wired), you can deploy code from it.
I think that should answer both questions.
As for the IP address for the second computer, I would recommend something between 10.25.50.10 and 10.25.50.50.
However, if you just set this computer to connect via DHCP, you should be just fine.

Hope that helps!