No Robot Code, Big Problem!

[Straberrie]

Hi,

The laptop that the team used to code and program broke, so we got a new computer. I loaded all the software on it and executed the updates provided on the FIRST website. I set up the static IP address to be what it has been on the previous computer ( 10.3.75.6).

Currently I am having a problem with the Crio. I used to be able to connect to the Crio from the previous laptop without a crossover, using Crio's first port. Now, with this computer, I had to use the Cross over. After i finally got the Crio to connect to the computer ( i pinged it after i connected it through the crossover), I decided to re-image and format the crio and used the 2010 version 20. The re-imaging was successful and the new IP allocated to the crio was 10.3.75.2. I reset the robot. I loaded the code to the Crio by connecting the computer to the Crio through a cross over ( port 1). The download was succesful. I reset the robot again.

Then, i connected the crio to the classmate now just using an ethernet, not dealing with the cross over, through port 1. I got the robot to communicate with the driver station, but the Crio Image appeared as "Unavailable" and there was "No Robot Code" when in fact I "successfully" loaded the code to the crio just moments ago.

Do any of you know what this problem could be caused by? Am i missing anything?

Any help would be really appreciated!