Announcement

Collapse
No announcement yet.

DOA KOP Radio

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • DOA KOP Radio

    When we connected our new OM5P-AC radio to the 12v/2A port on our VRM last week none of the LED's lit. At first I thought the students might have wired it incorrectly but after checking it looked OK and we swapped it out for last seasons radio which lights/powers on and works normally. We also switched back to the new radio with the same results - dead.

    Anyone have any ideas? To me it looks like a bad radio.
    Thanks, Brent

  • #2
    Re: DOA KOP Radio

    It sounds like you have done your due diligence in checking the wiring by verifying that an OM5P-AN works plugged into the same wiring.

    If you see no illumination of the power LED at all when plugging it into the known good wiring it sounds like the radio is damaged. You can find the OpenMesh RMA page here: http://www.open-mesh.com/rma
    FIRST®
    FRC Robotics Engineer

    Comment

    Working...
    X