Announcement

Collapse
No announcement yet.

dlink dap 1522

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • dlink dap 1522

    We have completed our FIRST competition. Does the d link need to be reset so we can communicate with the robot wirelessly. The communication is fine when the d link is hard wired to the dirvers station?
    A FIRST Year Coach,
    pcallan

  • #2
    Re: dlink dap 1522

    You do need to switch it from bridge mode to AP (access point) mode using the switch on the back.

    Comment


    • #3
      Re: dlink dap 1522

      You have two options to get your robot radio back into a state where it can communicate with your Classmate wirelessly.

      The option I would recommend is to reset the radio to factory defaults and set it up again as described in the Getting Started with the 2012 Control System document.

      The other option is to log into the bridge at it's current address 10.xx.yy.01 and disable the security, then move the switch to AP mode.
      FIRST®
      FRC Robotics Engineer

      Comment

      Working...
      X