Announcement

Collapse
No announcement yet.

Bridge reactions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bridge reactions

    Do the bridges spring back into the horizontal position when there is no weight on them or do they stay in the "tilted" position after a robot passes until another robot pulles or pushes it into a different position?

  • #2
    Re: Bridge reactions

    I'm not sure "spring" is the correct word, but the bridges do return to level when the robot leaves.

    Comment


    • #3
      Re: Bridge reactions

      Thank you!
      Last edited by CPraither2660; 01-13-2012, 08:24 PM.

      Comment


      • #4
        Re: Bridge reactions

        Originally posted by Gary Voshol View Post
        I'm not sure "spring" is the correct word, but the bridges do return to level when the robot leaves.
        If you look at the drawings, you will see there are no springs. The hinge point is not in the center, so when you remove the weight from the bridge its weight returns it to the center position.

        Comment

        Working...
        X